|There are quality checks at
every stage of manufacturing starting from Raw Cotton, Yarn,
Fabric, Processing, Cutting, Stitching and Packing. Before the
fabric is cut, it is checked whether it conforms to the customer’s
standards of shrinkage, finished g/cm2 etc. After each lot of
fabric is cut, 100% cut parts inspection is conducted to ensure
that only good quality pieces move to the stitching units.
During the process of sewing, each and every process is inspected
by inline inspectors. The inspectors make sure that only good
parts move to the next stage. An individual tracking number
is sewn inside each garment. After trimming and pressing of
the garments, highly experienced final inspectors inspect
each garment. The Quality assurance team monitors the performance
of every individual inspector by picking up the inspected
garments and checking the quality of these garments.
To ensure that the garments are packed as per the requirements
of our valued customers, we can even track & check, which
case the garment, has been packed in. With the help of this,
we plan to achieve the Zero Defect Level.